Installation Instructions for Microscope Slide Cabinets

Our modular cabinets can be stacked on top of each other to increase capacity.  The cabinets interlock without tools through the use of the built-in connection tabs.  Each cabinet has tabs on its bottom, which hook into slots in the cabinet or base unit below.

1. Holding the cabinet on a slight angle, hook the back tab into the slot in the back of the cabinet or base below.  Pull the cabinet forward to fully engage the tab into the slot.

Note: If you find the cabinet too heavy to work with easily, you can remove the drawers to reduce the weight during installation.

2. Lower the front of the cabinet down, guiding the front tab into the slot in the cabinet or base unit below.

3. Fill your new cabinet with slides!